Email - email@example.com
20 Church Walk, Colchester, CO1 1NS
Where - Colchester, United Kingdom
Designer - Richard Evanson
EVANSON BIKE WORKS
Maker - Richard Evanson & Lee Carey
These crafted and bespoke bicycles, hand built in Colchester, Britain's oldest recorded town, are made to be used. From the ground up, each bike is specifically fabricated for the rider and tailored to his or her needs. The company which has only been going for 10 months is built on a wealth of knowledge in steel frame building and bicycle mechanics. These bikes have been tested, ridden and loved.
Phone - 01803 553095
Email - firstname.lastname@example.org
17 Dartmouth Road, Paignton, Devon, TQ4 5AD
Maker - Simon Aske
Designer - Simon Aske
Simon Aske has designed and built carbon fibre bikes that have been used for Olympic, world and Tour de France glory.
Twenty years later and a seven day course at the bicycle academy he has now turned his hand to manufacturing in steel.
Based out of Colin Lewis Cycles in Paignton, which Simon owns and runs, each frame is designed for the customer using Simon's twenty five years of experience in fit and design.
Phone - 07729 591 479
Email - email@example.com
Beaumont Bicycle, Colebatch Farm, Colebatch, Nr Bishops Castle, SY9 5JY • 07729 591 479
Where - Colebatch
Maker - Elizabeth Colebrook
Designer - Elizabeth Colebrook
Liz Colebrook has worked in the industry for over 30 years taking time out in the nineties to study Occupational Therapy. Her company Beaumont Bicycle offers a bespoke framebuilding service based in Bishop’s Castle, South Shropshire. Her approach to bike fitting and frame design particularly welcomes customers needing or preferring to ‘step-through’ the frame but not exclusively. One of the few women framebuilders in the UK, Liz is someone who understands the body as much as the bike. Liz is also working with Trevor Jarvis of TJ Cycles – home of the Flying Gate - as one of his new framebuilders.
Email - firstname.lastname@example.org
Where - Milano
Maker - Dario Colombo
Designer - Dario Colombo
Each BiceBicycles frame is handmade in a small italian village near the Lake of Como. Geometry are tailored and tubes are chosen to suit each rider for the best fitting regarding his/her biomechanic caracteristics and bicycle usage. To respond cyclist needs Dario creates each frame one at a time following his experience from riding mtb, cyclocross and roadbikes. While he's not at work you'ld probably find him in a mtb or cyclocross singlespeed race!
Email - email@example.com
Where - Turkey
Maker - Burcak Erbil
Designer -Burcak Erbil
New-born Brelis Cycles meeting public at the Bespoked Bristol ’16 for the first time! The brainchild of framebuilder Burcak Erbil from Istanbul/Turkey, Brelis specializes in steel, built either in lugs or fillet brazing. Don’t be shy to stop by and have little chat over our worldwide shared passion!
Phone - +44 (0)7474094353
Email - firstname.lastname@example.org
Vale lane Workshop, unit 3A, 8 Vale lane , BS3 5RU Bristol
Where - Bristol
Maker - Davide Leoni
Designer -Davide Leoni
I’m an Italian designer based in Bristol, I currently work like design engineer but spend the rest of my time (not all the rest of my time) for building frame.
I’ve started in 2012 like an hobby and now it became a part time passionate job, hopefully full time job in the close future.
Phone - +33 6 38 15 65 85
117 Rue Montgolfier, 59100 Roubaix, France
Where - Roubaix, France
Maker - Andreas Behrens
Designer -Andreas Behrens
Frame builder Andreas Behrens founded LaFraise Cycles in 2015. Driven by the genuine love and passion for cycling, he builds custom steel bicycles one at a time in his workshop in Roubaix, in the north of France. And what can be more beautiful than building machines that give you the freedom to go anywhere you want.
Phone - 0845 0095396
Email - email@example.com
Where - Kent
Maker - Shaun Wakefield
Designer -Shaun Wakefield
From a heritage in mechanical engineering, time-served engineer Shaun then followed his creative ambitions to become a graphic designer before following his dream into frame building. For him, frame building is a perfect marriage of engineering and aesthetics, where design meets functionality, to create a thing of beauty and purpose. I will be displaying two bikes, likely to both to be Road bike, but maybe one Road and one track bike.
Phone - 0046 733 950923
Email - firstname.lastname@example.org
Where - Sweden
Maker - Nick Gregory
Designer -Nick Gregory
I'm an englishman living in Sweden who has been riding steel bikes for racing and touring since the 1980's. That passion has led me to building beautiful, practical, custom-fitted lightweight steel frames for racing, touring and daily transport. Designs inspired by the past with modern revisions, handcrafted individually in my small workshop in southwest Sweden.
Maker -Bob Thompson
Designer - Bob Thompson
After being stung a few times for a new chain and stuff, who hasn't thought “there must be something better”?…But after some determined experimentation with a rusty old mountain bike, I realised there was lots more to be had than just ditching the chain – something better to pedal with new design freedoms, and no need to tuck your trousers into your socks! Great for a zero maintenance commuting bike - folding if you want - or an MTB that loves to climb and doesn't care about the mud and grit, so don’t keep going round in circles!
Phone - +44 07778 429 313
Email - email@example.com
Where - Worcestershire
Maker - Doug Pinkerton
Designer -Doug Pinkerton
Pinkerton Cycle Restorations